1. <table id="igjqx"><ruby id="igjqx"></ruby></table>
        1. <tr id="igjqx"><label id="igjqx"></label></tr>
            GATEGORY
            National Service Hotline:15862057666
            ADD: NO.340 NORTH RENMIN
            ROAD, DAFENG 224100, CHINA.
            CONTACT: IVAN
            MOB:+86 158 6205 7666
            TEL: +86 515 8391 4286
            FAX: +86 515 8391 4288
            E-mail: sales@lixichina.com
                13815566521@139.com

            Your current Location: Home >
            • Troubleshooting
            • 2017/4/21  Reading Time:[2097]
            • Fault: when starting, the motor hum, but does not fuse compressor starting gates jump off? One reason: the extension cord size is too bottom. Correct: the use of high standard wire check switch insurance.
              Reason two: there are too many lights or electrical appliances to be used in the line of the compressor to correct the use of other lines or to remove the load from the line
              Reason three: check valve failure
              Reason four: the voltage is too low. Correct: check with voltmeter
              Reason five: the temperature is too low. Correct: warm up or use light lubricating oil
              Six reasons: fuse or switch specifications wrong. Correct: check replacement.
              Seven reasons: poor ventilation indoor temperature is too high. Correction: the compressor moved to the ventilation area
              Reason eight: pressure switch failure. Correct: replace pressure switch
              Fault two: compressor does not work?
              Reason one: the power line is not correct. Plug in power plug
              Reason two: pressure switch in the off position. Correct: switch on / off position
              Three reasons: no oil in the compressor body (which may be harmful to the compressor) correction: refueling
              Four reasons: the belt is too loose or too tight. Correct: adjustment.
              Fault three: rotation direction is wrong?
              Reason: the motor line is wrong. Correct: change the line
              Fault four: compressor overheating, motor overheating?
              Reason: the use of high pressure overload operation. Correction: reduce the use of pressure
              Cause: air cleaner or valve carbon is blocked. Correct: remove cleaning
              Cause: the belt is too tight or the center line is not aligned
              Cause: the ambient temperature is too high or the ventilation is poor
              Reason: the voltage is too low or the wire is too long
              Fault five: pressure can not rise to the specified value?
              Cause: valve assembly failure. Correct: remove and replace
              Cause: safety valve leakage. Correction: demolition repair, replacement
              Reason: the connection parts leak. Correction: maintenance, adjustment
              Cause: piston ring wear. Correct: replace piston ring
              Fault six: too much noise?
              Reason: lack of lubricating oil in the crankcase. Correct: check whether the bearing is damaged, re oiling
              Cause: belt pulley motor belt guard loose. Correct: turn off the machine and re tighten
              Reason: valve or piston carbon deposition. Correct: remove cylinder cover check
              Reason: bearing piston pin thrust bearing. Correction: sent to approved service center for inspection
              Fault seven: vibration?
              Reason: the pulley is not aligned or too loose. Correct: re aligned or fixed.
              Reason: crankshaft bending (deformation) correction: sent to the approved service center
              Cause: belt slack. Correct: adjust the belt
              The reason: the ground is not flat. Correct: flat ground.
              Fault nine: the oil consumption is too large or there is oil in the hose
              Cause: piston ring wear. Correction: replace the service center
              Cause: cylinder leakage. Correct: replace cylinder
              Reason: run in correction: re (run in)

            HOMEABOUT USNEWS CENTERPRODUCTHONORTABLNETWORKCONTACT US
            国语两人做人爱费视频